CT anatomical features of the sustentaculum fragment and their clinical significance / 中华创伤骨科杂志

Objective:To determine the anatomical parameters concerning the length, width and height of the sustentaculum fragment of the calcaneus using CT imaging data and their clinical significance.Methods:A retrospective study was conducted to analyze the CT imaging data of normal calcaneus in 96 patients (100 feet) which had been collected by Department of Orthopedics, Shanghai Tongji Hospital from January 2019 to September 2020. There were 45 males (48 feet) and 51 females (52 feet) with an age of (42.1±13.6) years, and 56 left feet and 44 right feet. After 3D models were reconstructed with the CT data using software Mimics 22.0, the calcaneus was viewed layer by layer at each level of the scan. After the first continuous bone trabecula on the medial side of the calcaneal central triangle was taken as the boundary, the model of the sustentaculum fragment was segmented. The length, width, and height of the sustentaculum fragment were measured. The outer contour of the sustentaculum fragment was projected onto the lateral wall of the calcaneus to draw the contour line using software Materialise 3-Matic 22.0. By overlaying projection line diagrams, a summary of projection line diagrams of 100 sustentaculum fragments was obtained. Seven screw insertion points were selected in the summary region of the projection line diagrams of the lateral wall of the calcaneus, and the distance from each point to the medial side of the calcaneus were measureed. The length, width, and height of the sustentaculum fragment, as well as the distance from the 7 insertion points to the medial side of the calcaneus, were compared between different feet and genders.Results:The length, width, and height of the sustentaculum fragment were (45.19±4.60) mm, (38.57±4.59) mm and (40.76±5.48) mm, respectively. There were no significant differences in the length, width or height of the sustentaculum fragment between different feet or in the height of the sustentaculum fragment between different genders ( P>0.05), but the length and width of the sustentaculum fragment in females were significantly smaller than those in the males ( P<0.05). The projection of the sustentaculum fragment was approximately ellipse on the summary region of the projection line diagrams on the lateral wall of the calcaneus, with the long axis approximately parallel to the midpoint tangent of the lateral edge of the calcaneal posterior articular surface, ranging from 2 to 20 mm from the posterior articular surface. The distances from the 7 insertion points to the medial surface of the calcaneus were (39.91±3.77) mm at point A, (40.89±3.55) mm at point B, (36.42±5.98) mm at point C, (39.12±5.52) mm at point D, (40.04±4.84) mm at point E, (33.00±3.96) mm at point F, and (33.04±3.82) mm at point H. There was no significant difference in the distances from the 7 insertion points to the medial surface of the calcaneus between different feet ( P>0.05), but the distances from the 7 insertion points to the medial surface of the calcaneus in the females were significantly smaller than those in the males ( P<0.05). Conclusions:Anatomical measurements of the sustentaculum fragment can provide a theoretical basis for the range of fixation of the sustentaculum screws. A summary of projection line diagrams of the sustentaculum fragment on the lateral surface of the calcaneus can serve as a reference for placement of sustentaculum screws. Measurement of the distances from 7 insertion points to the medial surface of the calcaneus can facilitate determination of the lengths of sustentaculum screws.

Study on anatomical parameters of adult lumbar intervertebral disc and endplate based on CT / 中国骨伤

OBJECTIVE@#To provide basic data for clinical application and individualized design of lumbar disc prostheses by measuring the anatomical parameters of lumbar intervertebral discs and endplates in healthy adults with CT three-dimensional reconstruction technology.@*METHODS@#A retrospective analysis was performed on 200 males and 200 females with normal lumbar spine who were admitted to the imaging center or outpatient department of the Second Affiliated Hospital of Xinjiang Medical University from September 2019 to December 2020. The age ranged from 20 to 60 years old, with an average of (40.61±11.22) years old. The measurement segment was L1-S1 intervertebral disc, and the measurement indicators included the axial anteroposterior diameter and transverse diameter of the intervertebral disc, sagittal anterior, middle and posterior height, coronal left and right height, intervertebral space angle, and transverse and anteroposterior diameters of the upper and lower endplates of each vertebral body.@*RESULTS@#①In terms of gender, the anatomical parameters of L1-S1 disc axial diameter, transverse diameter, sagittal anterior, middle and posterior height, left and right coronal height and intervertebral space angle were all higher in males than in females(P<0.05), and the anatomical parameters of upper and lower endplates of L1-S1 vertebral body were higher in males than in females(P<0.001). ②In comparison of sagittal height of anterior, middle and posterior intervertebral discs, the sagittal height of L1-L5 intervertebral discs was middle-high > anterior-high > posterior-high(P<0.001), while that of L5S1 intervertebral disc was anterior-high > middle-high > posterior-high (P<0.001). ③In the comparison of left and right coronal height, there was no statistical significance in the left and right coronal height of L1-S1 disc between male and female(P>0.05). ④The L1-S1 intervertebral spaces angle between male and female increased with the increase of vertebral body segments. ⑤The anterior and posterior diameters and transverse diameters of upper and lower of L1-S1 vertebral bodies endplates were height in males than in females(P<0.001).@*CONCLUSION@#The results suggest that gender differences should be considered in the design of adult lumbar disc prostheses. The anatomical parameters of the lumbar intervertebral disc varied with the increase of the vertebral body sequence, suggesting that different anatomical parameters of the intervertebral disc should be considered in the design of the artificial intervertebral disc, and the changes in the height of the sagittal position suggest that the design of the intervertebral disc should be wedge-shaped.

Clinical Value Evaluation of DR Corneal Suture Ring Localization and CT 3D Reconstruction Localization of Orbital Foreign Body / 中山大学学报(医学科学版)

ObjectiveTo investigate the clinical value of DR corneal suture ring localization and CT 3D reconstruction localization of orbital foreign bodies. MethodsRetrospective analysis was performed on patients （51 cases） suspected of ocular foreign bodies admitted to our hospital from January 2016 to December 2020 At the same time， DR corneal suture ring localization and CT three-dimensional reconstruction localization of orbital foreign bodies were performed， and the detection rate of foreign bodies by the two methods was calculated to analyze the location of ocular foreign bodies. ResultsThere were 38 cases of intraorbital foreign body identified by DR corneal suture ring localization method， and 46 cases of intraorbital foreign body identified by CT three-dimensional reconstruction localization method. The accuracy of CT three-dimensional reconstruction localization method was 90.20%， which was higher than that of DR corneal suture ring localization method 74.51% （P<0.05）. Intraocular foreign bodies in 23 cases could be distinguished by DR corneal suture ring localization， and 25 cases by CT 3D reconstruction localization. The maximum diameter of intraocular foreign bodies that could be distinguished by CT 3D reconstruction localization was （2.65±0.14） mm. The diameter of intraspherical foreign body was （2.94±0.36） mm （P<0.05） lower than that which could be distinguished by DR corneal suture ring localization method. The results of DR corneal suture ring localization of orbital foreign body showed no difference compared with the results of CT 3D reconstruction localization （P>0.05）. Forty cases of high density images inside and outside the eye could be clearly distinguished by CT 3D reconstruction. By using DR corneal suture ring localization method， 23 cases were confirmed to be intraocular high-density shadows， and 15 cases could not be confirmed to be intraocular high-density shadows （P < 0.05）. ConclusionsFor the location of intraorbital foreign bodies， CT three-dimensional reconstruction can be used as a conventional method for locating ocular foreign bodies with high resolution and accuracy， and can detect fine metal particles inside the eyeball. Meanwhile， for a few small foreign bodies in the iris root， ciliary body and lateral suspension ligament， it is necessary to locate orbital foreign bodies with DR corneal suture ring.

Chinese expert consensus on the application of integrated 3D reconstruction with artificial intelligence in thoracic surgery / 中国胸心血管外科临床杂志

@# In order to further regulate the application of 3D reconstruction in thoracic surgery, the Chinese Expert Consensus Group on the Application of Integrated 3D Reconstruction with Artificial Intelligence in Thoracic Surgery conducted discussions and developed this consensus. This consensus is based on the clinical experience and existing prospective or retrospective studies of 3D reconstruction technology in various scenarios of thoracic surgery and summarizes recommendations, and also appends a list of 3D reconstruction technology application scenarios that are currently controversial, not fully studied, or still in the exploratory stage, to provide direction and evidence for future clinical research and disease diagnosis and treatment, and to reach a consensus.

Tomografía computarizada con reconstrucción 3D para el diagnóstico de lesiones traumáticas de uretra / Three-dimensional computed tomography reconstruction for the diagnosis of traumatic urethral injuries

RESUMEN La uretrografía retrógrada es la técnica de referencia (gold standard) utilizada clásicamente para hacer diagnóstico de lesiones de uretra. En este contexto se presenta un caso en el que se realizó tomografía computarizada con reconstrucción 3D con contraste intravenoso y endouretral, pudiendo reconstruir la uretra en toda su extensión en forma tridimensional. De esta manera se arribó al diagnóstico de certeza de la lesión de uretra. Como ventaja del método se menciona la posibilidad de diagnosticar ‒ con un solo estudio por imágenes‒ lesiones de todo el tracto urinario, órganos sólidos, huecos y lesión del anillo pélvico asociados al traumatismo, con una alta sensibilidad y especificidad sin necesidad de requerir otros estudios complementarios.

ABSTRACT Retrograde urethrography is the gold standard method for the diagnosis of urethral injuries. In this setting, we report the use of computed tomography with intravenous injection and urethral administration of contrast medium and 3D reconstruction of the entire urethra. The definitive diagnosis of urethral injury was made. The advantage of this method is the possibility of making the diagnosis of traumatic injuries of the entire urinary tract, solid organs, hollow viscera and of the pelvic ring within a single imaging test, with high sensitivity and specificity, with no need to perform other complementary tests.

Bridging the structure gap between pellets in artificial dissolution media and in gastro-intestinal tract in rats

Changes in structure of oral solid dosage forms (OSDF) elementally determine the drug release and its therapeutic effects. In this research, synchrotron radiation X-ray micro-computed tomography was utilized to visualize the 3D structure of enteric coated pellets recovered from the gastrointestinal tract of rats. The structures of pellets in solid state and in vitro compendium media were measured. Pellets in vivo underwent morphological and structural changes which differed significantly from those in vitro compendium media. Thus, optimizations of the dissolution media were performed to mimic the appropriate in vivo conditions by introducing pepsin and glass microspheres in media. The sphericity, pellet volume, pore volume and porosity of the in vivo esomeprazole magnesium pellets in stomach for 2 h were recorded 0.47, 1.55 × 108 μm3, 0.44 × 108 μm3 and 27.6%, respectively. After adding pepsin and glass microspheres, the above parameters in vitro reached to 0.44, 1.64 × 108 μm3, 0.38 × 108 μm3 and 23.0%, respectively. Omeprazole magnesium pellets behaved similarly. The structural features of pellets between in vitro media and in vivo condition were bridged successfully in terms of 3D structures to ensure better design, characterization and quality control of advanced OSDF.

Effects of Fixed-Point Lateral Flexion and Rotation Manipulation on Intervertebral Foramina Morphology of Cervical Spondylotic Radiculopathy / 医用生物力学

Objective To analyze the changes in morphology of intervertebral foramina in patients with cervical spondylotic radiculopathy (CSR) treated with fixedpoint lateral flexion and rotation manipulation based on three-dimensional (3D) reconstruction technology, so as to provide references for the effectiveness of manipulation treatment. MethodsForty patients with CSR were treated with fixed point lateral flexion and rotation manipulation once every other day for a total of 7 times and 2 weeks as a course of treatment. CT data of the patients before and after treatment were analyzed by using multifunctional CT, Mimics 21.0, Geomagic and SolidWorks 2017. The area of the intervertebral foramen, anterior and posterior diameter of the intervertebral foramen, upper and lower diameter of the intervertebral foramen were measured before and after treatment, as well as the infrared thermal imaging temperature differences of the bilateral neck and shoulder, front and back of the upper limb, and the VAS scores of the patients were observed before treatment, 7 d after treatment, 14 d after treatment and 1 month follow-up. Results Foraminal area, anterior and posterior diameters, upper and lower diameters of 40 patients were improved after treatment, and the temperature differences of infrared thermal imaging of patients before and after treatment were statistically significant. The VAS score of the patients decreased progressively. Conclusions Fixed point lateral flexion manipulation can significantly improve the shape of the intervertebral foramen in patients with CSR, so as to achieve the treatment purpose of relieving nerve compression.

Hemodynamic Analysis on Proximal End of the Aortic Dissection with Different Rupture Shapes / 医用生物力学

Objective To explore hemodynamic performance of the aortic dissection after lesions, so as to provide a more scientific basis for patient treatment. Methods Based on computed tomography angiography (CTA) image data from a patient with complex Stanford B-type aortic dissection, the personalized aortic dissection models with different rupture shapes (H-type, O-type, and V-type) at proximal end of the aortic dissection were established. Combined with computational fluid dynamics (CFD) and morphological analysis method, distributions of the velocity at rupture section, the blood flow, the wall pressure and the wall shear stress (WSS) were analyzed. Results The flow velocity, the highest pressure difference and the WSS proportion at entrance of the H-shaped rupture showed larger hemodynamic parameters than those of the other two types. The risk of dissection rupture for type H was the largest, while type V was in the middle, and type O was the smallest. Conclusions This study provides an effective reference for further numerical analysis the cases and formulation of treatment plans.

Application of Three-dimensional Reconstruction in Single Utility-port Thoracoscopic Segmentectomy for Early Stage Non-small Cell Lung Cancer: A Propensity Score-matched Analysis / 肿瘤防治研究

Objective To evaluate the clinical value of 3D reconstruction in the single utility-port thoracoscopic segmentectomy of early stage NSCLC by propensity score matching (PSM). Methods We retrospectively analyzed clinical data of 150 early stage NSCLC patients undergoing single utility-port thoracoscopic segmentectomy. The patients were divided into reconstruction group (n=58) and non-reconstruction group (n=92) according to 3D reconstruction. PSM was performed on two groups to compare perioperative outcomes. Results Procedures were successfully completed on all patients, without perioperative death. In each group, 43 patients were successfully matched after PSM on the basis of 8 confounding factors, age, gender, smoking status, BMI, maximum tumor diameter on CT, tumor location, % FEV1 and type of planned segmentectomy. After PSM, in complex segmentectomy, the patients in the reconstruction group had shorter operation time (155.77±30.17 vs. 212.94±66.49min, P < 0.001) and less blood loss (46.00±25.94 vs. 88.79±68.36ml, P=0.002), compared with the non- reconstruction group. Conclusion Preoperative 3D reconstruction could help improve the efficiency of single utility-port thoracoscopic surgery for complex segmentectomy and reduce intraoperative bleeding.

CT manifestations and application progress of airway complications after lung transplantation / 器官移植

With the continuous improvement of surgical techniques and perioperative management, the success rate of lung transplantation has gradually increased, but airway complications after lung transplantation are still common. Airway complications after lung transplantation may reduce the quality of life, increase medical costs, and even threaten the lives of the recipients. In 2018, the International Society for Heart and Lung Transplantation (ISHLT) consensus proposed that airway complications included ischemic necrosis, anastomotic dehiscence, airway stenosis and tracheobronchomalacia. Bronchoscopy remains the gold standard for the diagnosis of airway complications. However, during the follow-up of lung transplant recipients, use of end-inspiratory CT scan combined with end-expiratory or dynamic expiratory CT scan may contribute to identifying a variety of airway complications, evaluating the location and degree of airway complications and providing beneficial supplement for the selection of clinical treatment.

Pre-planning ankle arthrodesis using 3d reconstructed tomographies / Desenvolvimento da artrodese do tornozelo baseada na tomografia com reconstrução 3d

ABSTRACT Objective: To implement one analysis method of the ankle bone contour that could make a more precise ankle arthrodesis. Methods: Twenty tomographies were submitted to 3D reconstruction. Seven points of anatomic interest for ankle arthrodesis with the three screws technique were marked with a triplannar marker. The median of the position of markers was estimated, and the union of the seven median points allow the construction of one median ankle for that population. Using this median ankle, sizes and angles for the screws position were determined. Results: Two median ankles were reconstructed, left and right. The position of the screw passage were determined considering the anatomical parameters. In the right ankle the lateral to medial screw should enter 4.56 cm and 0.79 above and posterior to lateral malleolus, with one inclination of 17.34° in relation to tibial longitudinal axis; and 0° in relation to tibial axial plane. The position for the other two screws is also described. Conclusion: Our article is the first to presents one precise guide for ankle arthrodesis based on a populational assessment. Level of evidence II, Diagnostic Studies.

RESUMO Objetivo: Implementar método de análise do contorno e alinhamento ósseos no tornozelo de uma população normal, possibilitando uma artrodese tibiotársica mais precisa. Métodos: Tomografias de vinte tornozelos foram submetidas à reconstrução 3D. Nesses exames, 7 pontos anatômicos de interesse para a técnica de fixação com 3 parafusos foram identificados e marcados com indicadores da posição triplanar. As médias das localizações de cada ponto foram calculadas. A união dessas médias permitiu a reconstrução de um tornozelo padrão daquela população. Nesses tornozelos médios estudou-se os comprimentos e ângulos para a passagem dos parafusos. Resultados: Dois tornozelos, direito e esquerdo, foram reconstruídos. A posição para a passagem dos parafusos em relação a parâmetros anatômicos foi determinada. Para o tornozelo direito, a passagem do parafuso de lateral para medial deve ocorrer com o ponto de entrada 4,56 cm acima e 0,79 cm posterior à ponta do maléolo lateral, com inclinação de 17,34° em relação ao eixo longitudinal e 0° em relação ao eixo axial da tíbia. As posições dos outros dois parafusos também estão descritas. Conclusão: Esse é o primeiro trabalho que apresenta um guia preciso para realização da artrodese do tornozelo, baseado em um estudo populacional. Nível de evidência II, Estudos Diagnósticos.

Three-dimensional finite element analysis of fibula implantation for China-Japan friendship hospital type osteonecrosis of femoral head / 中国组织工程研究

BACKGROUND: It is reported that the hip-conserving effect of osteonecrosis of femoral head is closely related to the retention of lateral column. The classification of China-Japan Friendship Hospital is based on the three-column structure, and the prediction accuracy of femoral head collapse is high. OBJECTIVE: To establish a three-dimensional finite element model for China-Japan Friendship Hospital classification of femoral head necrosis, and to analyze the mechanical changes of fibula implantation in each classification by finite element method, and to explore the significance of lateral column retention in hip preservation, so as to provide a basis for precise prediction of collapse of the classification. METHODS: Three groups of 11 kinds of three-dimensional finite element models of normal femoral head, China-Japan Friendship Hospital type femoral head necrosis (type M, type C, type L1, type L2, type L3) and fibula implantation were established. The finite element analysis was carried out by ANSYS software. The maximum stress, maximum displacement and load transfer mode of proximal femur were observed in each group. RESULTS AND CONCLUSION: (1) In the necrosis group, the strain was the largest, and the displacement was different due to the different types of necrosis. The displacement changes were as follows: Type M < type C < type L1 = type L2 < type L3. The displacement recovery of fibula implantation group was lower than that of the normal group, and the displacement recovery was different due to the different necrosis types. The displacement changes were as follows: Type M < type C < type L1 < type L2 < type L3. The reduction range of the displacement of the repaired necrotic femoral head gradually decreased from the lateral column to the medial column, which was lower than the maximum displacement of the normal femoral head. (2) The peak value of the stress nephogram of the loading area of the femoral head after necrosis was higher than that of the normal group. The peak value of necrotic type M was nearly normal. The peak value of necrotic type C was 74.5% higher than that of the normal group, and the peak value of necrotic type L was more than 100% higher than that of the normal group. The peak value of necrotic type M after operation was not only 14.2% lower than that before operation, but also was lower than that of the normal group. The peak value of necrotic type C after operation was 5.3% lower than that before operation, but higher than that of normal group. The peak value of necrosis type L after operation was lower than that before operation, but significantly higher than the normal level. (3) The load transfer in the normal femoral head was continuous. The conduction path was from the lateral column of the femoral head to the femoral moment. In the necrosis group, the internal load transfer of types M and C femoral head was continuous, and the conduction of type M was basically consistent with normal. The stress of type C conduction to femoral moment was reduced. The load transfer of L1, L2 and L3 type femoral head was interrupted. The stress changed in cliff type, and was unable to transmit to femoral moment, resulting in stress concentration in load area of the femoral head. A certain effective load transfer mode was reconstructed in the femoral head of the fibula implantation group, and the stress concentration at the femoral moment occurred in all types of conduction. Part of the load was transferred to the femoral moment through fibula, and the normal load transfer mode was partially restored. (4) China-Japan Friendship Hospital type fibula placement can prevent the collapse of the femoral head to a certain extent. The location and size of the necrosis area are very important. The closer the necrosis is to the lateral column, the easier it is to collapse and the more difficult it is to repair. The retention of the lateral column is an important factor for accurate prediction of the collapse of the femoral head.

Application of 3D reconstruction and Hookwire to localize pulmonary nodules in thoracoscopic pulmonary segmentectomy / 中国胸心血管外科临床杂志

@#Objective    To investigate the clinical value of 3D CT combined with CT-guided Hookwire for localizing small pulmonary nodules in thoracoscopic pulmonary segmentectomy. Methods    From December 2017 to February 2019, 39 patients received thoracoscopic pulmonary segmentectomy in our hospital, including 14 males and 25 females with a mean age of 51.33±11.17 years. Before operation, we used Mimics Medical 20.0 to re-establish the anatomy of lung and locate the small pulmonary nodules with Hookwire guided by CT. Based on the position of Hookwire needle, 3D CT images and simulated surgical methods, thoracoscopic pulmonary segmentectomy was performed accurately. Results    The surgery was successfully completed in 39 patients without a transfer to open procedure. The mean operation time, mean intraoperative blood loss, mean postoperative hospital stay, mean thoracic tube drainage time were 148.97±28.56 min, 27.95±17.57 mL, 6.95±1.68 d, 4.21±1.95 d, respectively. Postoperative complications occurred in 5 patients (12.82%), including atrial fibrillation in 1, pulmonary infection in 1, chylothorax in 1, intrathoracic hemorrhage in 1 and pneumothorax in 1. All actual surgical margins were larger than 3.0 cm. Conclusion    The application of preoperative 3D CT combined with CT-guided Hookwire to localize small pulmonary nodules is helpful for accurate anatomical segmental resection of the lung, making the operation safe .

Research Method for Numerical Simulation on Upper Respiratory Tract Airway State Based on 3D Printing and CT Reconstruction / 医用生物力学

Objective To establish a comprehensive method combining physical model experiment and numerical simulation for studying airflow state of upper respiratory tract. Methods Based on CT medical images published online, a three-dimensional (3D) model of human upper respiratory tract was reconstructed. Based on 3D printing technology, an experimental model of the upper respiratory tract was established and the flow process of respiration was measured. A numerical simulation model was created based on the meshing of upper respiratory tract model and the turbulent Realizable k-ε model. Results Firstly, the result of numerical simulation was compared with the experimental conditions, and good agreement was achieved. The numerical simulation results showed that the airflow in respiratory process was in a parabolic shape; the distribution of flow field, pressure on wall and vortex structure were different between inspiratory and expiratory phases; there were air residues in the upper and lower nasal passages during the respiratory exchange process. In addition, the effects of airflow on physiological environment of the upper respiratory tract were preliminarily analyzed through the steak line, pressure field and vortex structure distribution. Conclusions The method proposed in this paper has the characteristics of pertinence, rapidity and accuracy, which gives full play to the advantages of reliable physical experiments and fine numerical simulation, and is applicable for studying different problems of the upper respiratory tract in different cases, with a high value for personalized diagnosis and treatment in clinic.

Application of mixed reality technique for the surgery of oral and maxillofacial tumors / 北京大学学报(医学版)

OBJECTIVE@#To explore the application of mixed reality technique for the surgery of oral and maxillofacial tumors.@*METHODS@#In this study, patients with a diagnosis of an oral and maxillofacial tumor who were referred to Department of Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology from December 2018 to January 2020 were selected. The preoperative contrast-enhanced computed tomography data of the patients were imported into StarAtlas Holographic Medical Imaging System (Visual 3D Corp., Beijing, China). Three-dimensional (3D) model of tumor and key structures, such as skeleton and vessels were reconstructed to three-dimensionally present the spatial relationship between them, followed with the key structures delineation and preoperative virtual surgical planning. By using mixed reality technique, the real-time 3D model was displayed stereotactically in the surgical site. While keeping sterile during operation, the surgeon could use simple gestures to adjust the 3D model, and observed the location, range, and size of tumor and the key structures adjacent to the tumor. Mixed reality technique was used to assist the operation: 3D model registration was performed for guidance before tumor excision; intraoperative real-time verification was performed during tumor exposure and after excision of the tumor. The Likert scale was used to evaluate the application of mixed reality technique after the operation.@*RESULTS@#Eight patients underwent mixed reality assisted tumor resection, and all of them successfully completed the operation. The average time of the 3D model registration was 12.0 minutes. In all the cases, the surgeon could intuitively and three-dimensionally observe the 3D model of the tumor and the surrounding anatomical structures, and could adjust the model during the operation. The results of the Likert scale showed that mixed reality technique got high scores in terms of perceptual accuracy, helping to locate the anatomical parts, the role of model guidance during surgery, and the potential for improving surgical safety (4.22, 4.19, 4.16, and 4.28 points respectively). Eight patients healed well without perioperative complications.@*CONCLUSION@#By providing real-time stereotactic visualization of anatomy of surgical site and guiding the operation process through 3D model, mixed reality technique could improve the accuracy and safety of the excision of oral and maxillofacial tumors.

Preoperative Evaluation of the Texture of Pituitary Adenoma by MRI-Based Three-Dimensional Reconstruction / 中国医科大学学报

Objective To investigate the usefulness of three-dimensional reconstruction in the preoperative evaluation of the texture of pituitary tumors. Methods Seventy patients with pituitary tumors admitted to our hospital between January 2015 and July 2018 were enrolled in the study. All patients underwent enhanced MRI scanning before surgery. They were classified into the soft group, medium group, and tough group according to the tumor texture. The patient's clinical data, MRI images, and surgery conditions were collected.The Mimics software was used to reconstruct the three-dimensional models of pituitary adenomas. The volume and surface area of different tumor signal groups were calculated and analyzed. In addition, the relationships between tumor size, tumor resection, and postoperative complications were analyzed. Results The three-dimensionally reconstructed model of the pituitary adenoma had a clear outline and was consistent with the tumor area in the MRI images. The calculated average threshold accurately segmented the images. Grouped by the classification of texture, the differences of the proportions of each part were statistically significant (P ＜ 0.01). According to the ordinal polytomous logistics regression analysis, the proportion of the volume of the higher part positively correlated with the tumor texture (P ＜0.05), and the ratio of the surface area of the medium part to the overall surface area positively correlated with the tumor texture (P ＜ 0.05).Conclusion The use of Mimics software for 3 D reconstruction of preoperative MRI images can accurately predict the tumor texture in pituitary tumors and can provide a basis for the choice of surgical methods.

3D printing in vitro modeling for minimally invasive treatment of complex pelvic fractures / 局解手术学杂志

Objective To explore the clinical effect of 3D printing in vitro modeling for minimally invasive treatment of complex pelvic fractures.Methods From April 2016 to June 2017, 18 cases of complex pelvic fractures were treated by 3D printing in vitro modeling were selected.The operation time and intraoperative bleeding volume were recorded.Fracture reduction was evaluated by X-ray, CT and Matta scores, and functional recovery was assessed by Majeed score.Results All 18 patients were followed up for 12 to 24 months, with an average of 15.8 months.The operation time of 18 patients was 80～160 minutes, with an average of (120±23.1) minutes;the amount of bleeding was75～160 m L, with an average of (113.6±29.1) m L;the length of incision was 7～14 cm, with an average of (9.3±1.8) cm.According to the Matta score, the fracture reduction was excellent in 12 cases, good in 4 cases, fair in 2 cases, the excellent and good rate was 88.9％.Majeed score was used to evaluate functional recovery 6 months after operation, the results showed that 13 cases were excellent, 4 cases were good and 1 case was fair, the excellent and good rate was 94.4％.No complications such as internal fixation loosening or breakage occurred during the follow-up period.Conclusion For complex pelvic fractures, 3D printing in vitro modeling assisted minimally invasive surgery can make the operation more precision with less trauma, reduce the incidence of complications, and speed up the recovery of patients.

Finite Element Simulation of AnyBody-Based Musculoskeletal Multi-Body Dynamics / 医用生物力学

Objective To investigate the method of modeling, finite element modeling and AnyBody musculoskeletal multi-body dynamics simulation technique analyze the biomechanics of clinical orthopaedic surgery. Methods The AnyBody software was used to establish the musculoskeletal motor model of the individualized upper limbs according to the height, weight and CT data of the volunteers. The flexion motion of the elbow in normal people was simulated, and the muscle force, joint force, torque, constraint condition of the humerus during the flexion movement were derived and used as the boundary conditions of finite element analysis.Then, the 3D reconstruction was conducted in the MIMICS software based on CT data. In the Geomagic Studio software, the humeral curved surface and position coordinate matching were completed, and grid division and material assignment were done in the HyperMesh software. Finally, the 3D reconstruction for finite element model of the humerus was introduced into ABAQUS software. The boundary condition data derived from the AnyBody software were applied and the stress calculation analysis was performed. Results The results of the stress and displacement of the humerus during elbow flexion motion were calculated in the ABAQUS software. The maximum stress and displacement of the humerus were 0.76 MPa and 20 μm when flexion of the elbow joint was about 90°. Conclusions A continuous dynamic analysis of humeral stress and displacement during elbow flexion motion was realized, which was more consistent with the requirements of human physiological anatomy and could provide an efficient analysis platform and a new way for studying clinical orthopedic problems.

Basic anatomical research of the fallopian tube and its correlation with the vascular supply of the ovary / 中国实用妇科与产科杂志

Fallopian-tubal diseases are not rare inclinical practise that not only damage the fertility offemale,but also are lethal under certain circumstances.Hence OBGYN doctors should gain an insight into theanatomy related to the fallopian tube.Here we discussthe current status of the anatomical research on fallo-pian tube and introduce its correlation with the vascular supply of the ovary.

Comparative evaluation of anatomic structures in regio manus and regio pedis on computed tomography images and plastinated cross-sections of horse / Evaluación comparativa de estructuras anatómicas en regio manus y 1 en imágenes de tomografía computarizada y cortes transversales plastinados de caballos

SUMMARY: Movement analysis of horses is closely related to the bone, joint and muscle composition. Equine foot is quiet important not only for veterinarians, but also for farmers and horseshoer. In this study, it is aimed to evaluate and compare the anatomical structures of equine foot obtained from computed tomography images and S10B silicone plastinated sections of horse and 3 dimensional images of related structures as well. Four adult horses were used in this study. Computed tomography images were acquired in a proper position for equine feet. Then S10B silicone plastination was performed for the same specimens. Plastinates were sliced into 1 cm sections, corresponding to the computed tomography images. The sections obtained from silicone plastination were found to be compatible with computed tomography images. It was seen that osseous structures and tendons were clearly identified on computed tomography images. It was observed that the shrinkage on the osseous tissues was very limited. It was thought that the proportional differences between the plastinated specimens and computed tomography images were related with the fixation process. The specimens plastinated with S10B silicone polymer was determined to be closer to natural colour when compared to the standard polymers. Therefore it was found to be more useful. It is considered that plastinates can be effectively used in veterinary orthopaedics and radiology trainings as well as in veterinary anatomy education.

RESUMEN: El análisis del movimiento de los caballos está estrechamente relacionado con la composición ósea, articular y muscular. El pie equino es muy importante no solo para los veterinarios, sino también para los agricultores y herradores. El objetivo de este trabajo consistió en evaluar y comparar las estructuras anatómicas del pie equino obtenidas a partir de imágenes de tomografía computarizada y secciones plastinadas con silicona S10B y también con imágenes tridimensionales de estructuras relacionadas. Cuatro caballos adultos fueron utilizados en este estudio. Las imágenes de tomografía computarizada se adquirieron en una posición adecuada para los pies equinos. Luego se realizó plastinación con silicona S10B para las mismas muestras. Los plastinados se cortaron en secciones de 1 cm, correspondientes a las imágenes de tomografía computada. Las secciones obtenidas de plastinación con silicona fueron compatibles con las imágenes de tomografía computarizada. Se observó que las estructuras óseas y los tendones estaban claramente identificados en las imágenes de tomografía computarizada. Se observó que la contracción de los tejidos óseos era muy limitada. Se pensó que las diferencias proporcionales entre las muestras plastinadas y las imágenes de tomografía computada estaban relacionadas con el proceso de fijación. Se determinó que las muestras plastinadas con polímero de silicona S10B se presentaron con un color más cercano al natural en comparación con los polímeros estándar. Por lo tanto, se encontró que fue más útil. Se considera que los plastinados se pueden utilizar eficazmente en ortopedia veterinaria y capacitación en radiología, así como en educación en anatomía veterinaria.